High pressure reactor apart
The Rector andorra is the basic model. Extended by a double-jacket oil heater or electric heater, this batch reactor becomes the apart.
- Nominal volume ml: 60, 100
- Working volume ml: 20-40, 40-60
- Working pressure bar: 200, 280, 480
- Working temperature °C: 200, 250, 300
- Material WNr. 1.4435 at 200 bar - WNr. 2.4602 at 250 bar - WNr. 1.4980 at 280 bar
- Union nut as lock M48 x1.5 mm, width across flats SW55
- Double sealed: O-ring and medium seal metal to metal (cutting ring).
- Reactor cover resp. magnetic stirrer drive with a torque of 20 Ncm and integrated micromotor 24V/DC
- Output speed with ball bearing 0-1'300 rpm, with plain bearing 0-1'200 rpm.
- Regulating shut-off valve for gas supply
- Regulating shut-off valve for pressure relief
- Regulating shut-off valve with immersion tube for sampling
- Pressure gauge in chemical version
- Bursting disc holder equipped with bursting disc
- Immersion tube for thermocouple with ø 3 mm (without thermocouple)
- Temperature sensor Pt100 or type K suitable
- Stirring element: gas supply stirrer ø 18 x 64 mm
- Fluid or electric heating
- Control unit ordino CS340 is the perfect complement to small reactor apart.
- Pressure stages: 200, 250 or 480 bar depending on the choice of material.
- Temperature stages °C: 200, 250, 300 depending on the choice of material.
- Material for wetted parts WNr.: 1.4435 (AISI 316L), 2.4602 (HC22) and 1.4980 (AISI 660) as standard. Versions in Hastelloy C276, B3 or titanium size 2 on request.
- The autoclave vessel is double-sealed: once in the upper area by an O-ring made of Viton, EPDM or Kalrez and at the bottom via a metal-to-metal medium seal (cutting ring).
- Temperature sensor Pt1000, type K or type N in the immersion tube for measuring the medium temperature (not included in delivery).
- By opening the locking nut SW12 mm, the output shaft can be removed for cleaning the inside or bearing replacement. Either ball bearings or plain bearings are used, depending on the medium or material used.
- Two different heating systems up to 750 W are offered. You can choose either an electric or an oil-heated system (double jacket). The latter with inlet and outlet M16 x 1 mm.
In use as single version apart
In the basic version, a quadruple chassis with independent heating units is one of its outstanding features. The four complete autoclave units andorra can be removed from your heating/cooling unit. With the andorra, which is used here as a module, "avalon" also confidently combines all the wishes of an autoclave lid with fully integrated magnetic feed-through, a micromotor, gas connections and safety attributes. The plug-in connections for heating and thermocouple are located on the back of the autoclave chassis.
|Article No||Vol. ml||Pres PS bar||Temp. TS C°||Pres PA bar||Temp. PA C°||Mat. WNr.||Sensor / Heating||Drive / Version||L x W x H mm|
|132379||60||250||225||200||200||1.4435||Type K, electric||3 needle valves||353 x 275 x 624|
|130072||60||250||225||200||200||1.4435||1 x Pt100, fluid||3 needle valves||343 x 275 x 622|
|132378||60||350||275||280||250||2.4602||Type K, electric||3 needle valves||353 x 275 x 624|
|132381||60||350||275||280||250||2.4602||1 x Pt100, fluid||3 needle valves||343 x 275 x 622|
|132358||60||600||325||480||300||1.4980||Type K, electric||3 needle valves||353 x 275 x 624|
|132380||60||600||325||480||300||1.4980||1 x Pt100, fluid||3 needle valves||343 x 275 x 622|
|132377||100||250||225||200||200||1.4435||Type K, electric||3 needle valves||353 x 275 x 624|
|130071||100||250||225||200||200||1.4435||1 x Pt100, fluid||3 needle valves||343 x 275 x 622|
|132376||100||350||275||280||250||2.4602||Type K, electric||3 needle valves||353 x 275 x 624|
|132383||100||350||275||280||250||2.4602||1 x Pt100, fluid||3 needle valves||343 x 275 x 622|
|132375||100||600||325||480||300||1.4980||Type K, electric||3 needle valves||353 x 275 x 624|
|132382||100||600||325||480||300||1.4980||1 x Pt100, fluid||3 needle valves||343 x 275 x 622|
* For a direct quote request, click the corresponding article number.